Thermal Analysis from Linseis GmbH Germany

STA-PT Platinum Series Simultaneous Thermal Analyser System:

The system is based on a Thermo gravimetric balance and is able to accommodate either TG or TG/DTA or TG/DSC measuring head for simultaneous measurement. This system is unique and is able to offer excellent return on the investment. Just with a measuring head change it can create DSC or DTA data on the same system in addition to the TG signal which is many times essential for research applications. Furnaces available from -150 to 2400 C.



DSC-PT10 Differential Scanning Calorimeter system :

Heat Flux design. Measures Enthalpy, melting energy, specific heat, glass point crystallinity reaction enthalpy thermal stability oxidation stability aging, purity, phase transition, eutectic, polymorphous, product identification. Temperature range -150 to 700 Deg/C and Rt to 1550 Deg/C for high temperature applications.



L77 - Thermomechanical Analyzer :

For measurement of physical properties such as dynamic mechanical analysis temperature range from -150 to 500 and RT to 1500 Deg./C.



L 75 / 76 - Dilatometer Measurement of coefficient of Thermal Expansion :

Determining sintering process in metals, ceramics, or powered metals. Temperature ranges available from
150 to 2900.



Laser Dilatometer :

Highest resolution non contact Dilatometer measurement by using Laser. Absolute measurement and no-calibration necessary. Temperature range from -180 to 1600 at heating/cooling rate of 0.1 to 99.9 K/s. This is a special system for absolute measurement.



RITA (Rapid Inductive Thermal Analysis) Dilatometer system :
A dilatometer system using inductively heated furnace for fast heating and fast cooling at the rate of 100 k/s and cooling similarly 100 k/s. This system especially usefull for metal quenching studies.

All the above Linseis equipments are available with accessories like gas control system to work under oxidizing, reducing and inert atmosphere, high vacuum option, FTIR and MS option.